★Separate board outdoor passing machine, wheelbase 230, the structure of the FPV frame adopts the front narrow and wide width, the front short and the long long layout design, the front and rear two reinforcing plates play the role of reinforcement and protection.
★Applicable to 5-inch paddle, 5.0mm narrow arm, supported by 30mm aluminum column, flight control hole position is suitable for M3*20*20/M3*30.5*30.5, sufficient and compact body space, camera side plate provides porous position adjustment For 19mm Micro camera.
★The design of the fuselage is simple, the center of gravity of the whole machine is on the front, and when the speed of the aircraft needs to be tilted forward, the aircraft has the advantage of the center of gravity, reducing the rear motor load required for the aircraft to tilt forward.
★When the airplane is turning, the rear long wall will have a longer rear arm to provide the centripetal force, so that the aircraft can be locked in the corner, and the battery is placed underneath.Applicable to the competition flight.
★100% NEW-Produced By TCMMRC ,Well made and durable.
Material：3K Carbon Fiber
Upper board: 2mm
Motor hole position: M3*16*16mm
Flight control hole position: M2*20*20/30.5*30.5mm (supports 2 kinds of holes)
Camera hole position: 19*19mm Micro
Space height: 30mm
Paddle: 5 inches
Rack net weight: 99.6 g
X board *1,
Camera side panel*2,
Iron screw package: M3*6=8, M3*12=12,
Press 8 nuts.
Aluminum column package: M3*30=4 (black pull flowers),
M3 isolation column 4